Land Based Genset-SD-SC1500

 

 

Gen-set specifications
Model	SD-SC1500
Standby Rating  kVA/kWe	1650/1320
Prime Rating  kVA/kWe	1500/1200
Voltage V	400/230
Frequency  Hz	50
Power Factor	0.8(lagging)
No. of Phases	3
Fuel consumption@25%/ 50% / 75%(L/h）75%(L/h）	103 / 181 / 252
Fuel consumption@100% / 110%（L/h）	343 / 377
Sound@1m（dB·(A)）	Open≤110 ; Silence ≤90
Emission level	Non-Road China Ⅱ
Ambient temp（℃）	-5～45
Gen-set regulation class	ISO 8528-5 G2
Steady-state voltage deviation	≤±2.5%
Transient voltage deviation （100%sudden power decrease/increase）	≤+25% ；≤-20%
Steady-state frequency band	≤1.5%
Gen-set regulation class	≤+12%；≤-10%

 

 

Standard
	u Electronic	u DC24 Electric starter	u SDEC6110N
	u Closed water-cooled	u IP22	u H type insulation
	u Air filter	u Metal bowl shock absorbers	u Charger
	uStartingbatteries+connective wires+    Negative switch	u Radiator	u Oil Drain  plugs
	u Packaging：Wound film packing	u Low noise container form	u Random files
	u Color：Gray-SME（open type）/ Gray（low noise）		u PMG

Options
	◇  Line Voltage380V/415V	◇  Line Voltage 440V/480V	◇  Voltage 6.3kV/10.5kV /13.8kV
	◇  Single Voltage 220V/230V	◇  Automatic Transfer Switch	◇  Automatic Parallel system
	◇  Engine Heater (water/fuel)	◇  Oil heating	◇  Alternator heater
	◇  Circuit Breaker	◇  AREP	◇  Cloud monitoring
	◇  External fuel tank（1000L）	◇  Muffler	◇  Black smoke purification device

 

Engine

 

• SME R series, 12 cylinder, 60 ° V-type 4-stroke, radiator cooled engine
• Well-designed air handling system with
• Dry type, Replaceable paper element air cleaner with restriction indicator
• Intercooler
• Optimized turbocharger for increased altitude capabilities
• Electronic governor
• Radiator
• Electrical starter motor with soft start engagement feature
• Intelligent fuel injection technology to start fast guarantee
• Battery charging alternator
• 4 x 12 V DC batteries

 

Alternator

 

• PMG excitation system, conforming to IEC 60034-1
• Long-life sealed bearings Steel casing
• High efficiency
• Steel housing
• Single-bearing construction
• Protection grade IP22
• Insulation class H
• Automatic voltage regulator

 

 

Control Module Specifications

 

The SDEC6110N is an Auto Mains Failure Control Module

• Back-lit LCD display
• Detect speed, frequency, voltage, current, oil pressure, water temperature
• Warning and protection function, and display the reason for generator set alarm and shutdown
• Record operating hours, provide monitoring and maintenance information

 

 

 

Engine specifications
Make	SME
Mode	S12R-PTAA2-C
Rated Speed r/min	1500
Prime Power kW	1277
Overload Power kW	1404
Cooling	Liquid cooled
Governor	Electronic
Aspiration	Turbo & Intercooler
No. of cylinders	12、60°V
Bore (mm) x Stroke (mm)	170*180
Displacement (L)	49.03
Starting system	24VDC
Total coolant capacity (L)	325
Total lubrication system capacity (L)	180
Cooling fan airflow（m³/min）	1800
Exhaust Temperature (°C)	≤520
Recommended air flow @ PRP(m³/min)	118
Exhaust back pressure (mBar)	≤60
Radiator design temperature（℃）	40/50

 

 

 

Alternator specifications
Make	KAIJIELI
Alternator Frame	TWGⅡ404HC1
Exciter Type	PMG
Enclosure	IP23
Stable voltage state  rate	≤±1%
Class of Insulation	H
Winding Pitch	5/6
Connection	Single bearing

 

 

Remarks

Prime Rating: – For variable load applications, there is no limit to hours of use throughout the year. The average allowable output power of continuous operation for 24 hours shall not exceed 80% of the commonly used rated power.

Standard Conditions

Standby Rating: It can be used in the event of a power outage on the grid, or under test conditions, and the maximum annual use time is not more than 200 hours. The average allowable output power of 24 hours of continuous operation shall not exceed 80% of the standby rated power.

Note: Ambient temperature 25°C, altitude 1000m, relative humidity 30%. Fuel consumption rates are based on diesel density of 0.85 and according to BS2869: 1998, Class A2.

 

Gen-set  Dimensions
Gen-set Mode	Rated Power (kW)	Length (mm)	Width (mm)	Height (mm)	Wet Weight* (kg)	Standard Fuel tank Capacity(L)
SD-SC1500	1200	5120	2202	2556	12000	/
SD-SC1500S	1200	9000	2438	2896	19000	1000

*: Include coolant and oil.

Attention: This weight is the data for the standard configuration of the generator set. For weight information for other configurations, please refer to the relevant information in the unit outline drawing

Attention: Product parameters are subject to change without prior notice